
Introduction
Linear Rail 3000mm delivers high-precision, high-rigidity linear motion across a full 3-meter travel without mechanical splicing. Manufactured from premium high-carbon chromium bearing steel with precision-ground raceways, it achieves positioning repeatability within ±0.01mm and supports dynamic loads up to 20kN - making it the motion backbone for large CNC gantries, automated production lines, laser cutting systems, and semiconductor equipment.
Where spliced short rails introduce accuracy discontinuities and alignment complexity, a monobloc 3m linear rail maintains uniform straightness, consistent preload, and stable friction across the entire length. Each unit is produced in a temperature-controlled grinding facility using Japanese and German CNC grinding machines, then validated through full-length CMM inspection before shipment.
Compatible with standard HGR/MGN/SBR series sliders, including direct interchangeable fit with THK and HIWIN equivalent profiles upon request.
Technical Specifications
| Parameter | Value |
|---|---|
| Rail Length | 3000mm (custom lengths available) |
| Available Rail Series | HGR15 / HGR20 / HGR25 / HGR30 / HGR35 / HGR45 |
| Positioning Repeatability | ±0.01mm |
| Accuracy Grade | P Grade (Normal); H Grade (High Precision) available |
| Max Dynamic Load | Up to 20kN (series-dependent) |
| Material | High-carbon chromium bearing steel |
| Surface Treatment | Nickel plating; blackening available |
| Straightness | ≤0.04mm per 1000mm |
| Hole Pitch | Varies by series - drawing available on request |
| Certification | ISO 9001, CE |
| MOQ | 1 piece |
| Delivery | Standard 7–15 days; custom 30 days |
| Payment | 100% T/T; 30% deposit + L/C balance |
| Warranty | 12 months |
Need a specific rail width, hole pitch, or cross-section drawing? Contact us - we provide free DXF/PDF technical drawings within 24 hours.
Why Choose a Monobloc 3m Linear Rail
Long-stroke linear motion is often solved by splicing shorter rails - but this introduces measurable accuracy drops at every joint, complicates parallel alignment, and creates failure points under vibration. A monobloc 3m linear rail eliminates these issues entirely.
01
Accuracy continuity across full length. A single precision-ground rail maintains consistent straightness without the "steps" created by butted joints, which is the prerequisite for reliable positioning over 3-meter travel.
02
Structural rigidity as a unified beam. The rail acts as an integral beam, resisting overturning moments more effectively than spliced assemblies - critical in gantry and heavy-duty lateral-load applications.
03
Simplified installation and lower total cost. Fewer alignment operations, fewer fastening points, and a single inspection report reduce both installation time and downstream maintenance overhead.
04
Uniform performance along full travel. Single-piece heat treatment and grinding ensure consistent friction characteristics from end to end - no hot spots, no tight zones, no slip.
05
Application Scenarios

Large CNC machining centers and gantry mills
Supports stable crossbeam movement across full 3-meter X/Y axis travel for high-precision machining of oversized workpieces.

Laser and plasma cutting machines
Provides the straightness and rigidity required for high-speed long-axis cutting without positional drift across the full stroke.

Automated storage/retrieval systems (AS/RS)
Serves as the track foundation for stacker cranes and shuttles requiring long-distance, high-speed, repeatable positioning.

Large-format semiconductor and PCB equipment
Lithography machines, wafer inspection systems, and PCB drilling equipment depend on full-length precision rails to maintain nanometer-level motion accuracy across extended travel.
Compatibility & Interchangeability
Baili 3000mm rails are manufactured to standard cross-sectional profiles compatible with HGR/MGN/SBR series sliders. Direct-interchange equivalents for THK HSR, HIWIN HGR, and INA series are available - specify your current rail model when inquiring and we will confirm compatibility or provide a matching drawing.
Custom hole pitch, mounting face configuration, and end-machining are available for OEM integration.
From Our Blog: Why Long-Stroke Rails Demand a Different Approach
When rail length extends past 2 meters, three manufacturing challenges compound simultaneously: achieving micron-level straightness across the entire length, maintaining consistent raceway hardness through uniform heat treatment, and conducting 100% full-length metrology rather than sampling. A monobloc 3m linear rail eliminates the accuracy discontinuities, alignment complexity, and vibration failure points that come with spliced assemblies - and delivers consistent friction characteristics from end to end.
For selection, the critical decisions are: confirm your effective stroke (rail length must exceed stroke to accommodate block travel plus end buffers), analyze moment loads from your moving mass at maximum acceleration, and specify accuracy grade before ordering. Achieving H Grade over 3000mm is exponentially harder to manufacture than over 500mm, and not all suppliers can deliver it in series production. If you are designing a new gantry axis or replacing an existing long rail, the full selection logic is covered in our guide.
→ Long-Stroke Linear Rail Technology: Application & Selection Guide
Why Baili
20 years of core team experience in linear motion engineering, with a 14,000 m² factory in Lishui, Zhejiang - 100% in-house from forging to final CMM inspection.
Monthly capacity: 100,000 sets. We support both sample orders (MOQ: 1 piece) and high-volume OEM contracts without lead time compromise.
Japanese and German CNC grinding machines with full-length CMM metrology. Inspection reports are traceable and delivered with every shipment.
ISO 9001 and CE certified. Approximately 20 national patents. Regular exhibitor at China International Industry Fair and Hannover Messe.
7–15 day standard delivery on in-stock series from our Yangtze River Delta supply chain. Custom lengths in 30 days.
98.7% customer satisfaction rate. 24/7 technical support line with 72-hour field service coverage nationally. 12-month warranty on all products.
LOGO customization, OEM packaging, and factory visits are all supported - contact us to schedule.




Frequently Asked Questions
Q: Can you supply a 3000mm rail with a non-standard hole pitch for my machine frame?
A: Yes. We accept custom hole pitch, hole diameter, and end-machining configurations. Provide your drawing or mounting face dimensions and we will confirm feasibility within 24 hours.
Q: Does a 3000mm monobloc rail have a sag or deflection concern during shipping and installation?
A: Sag under self-weight over 3 meters must be handled. We ship all long rails in rigid wooden crates with full-length support to prevent deflection in transit. During installation, the rail must be seated on a flat reference surface immediately - never supported at the ends only. Installation guidance documentation is available on request.
Q: Is your 3000mm rail compatible with my existing HIWIN or THK sliders?
A: In most cases, yes. Provide your current rail model number and we will confirm cross-section compatibility or supply a tolerance comparison drawing.
Q: What accuracy grade is available for 3000mm?
A: P Grade (Normal) is standard. H Grade (High Precision) is available - contact us to confirm lead time, as full-length H Grade grinding requires additional scheduling.
Q: What is the warranty period and how are overseas after-sales issues handled?
A: All products carry a 12-month warranty. For defects caused by manufacturing, replacement parts are dispatched by international express at no charge. For installation-related issues, parts are still supplied - charged at cost. You can reach our technical support line at any time; we maintain 24/7 coverage.
Hot Tags: linear rail 3000mm, China linear rail 3000mm manufacturers, suppliers, factory, telescoping linear rail, hgr20 linear guide rail, square linear rails, Eg15 Linear Bearing, sbr 20mm linear rail, mgn7h linear rail

