When sourcing a replacement nut or designing a new linear motion system, buyers often come across four model names: SFU, SFS, SFY, and SFE. At first glance, they may seem like different versions of the same component. However, their dimensions, mounting arrangements, and internal designs can vary, even when they are used with similar screw sizes.
Choosing the wrong one can cause problems during installation. The mounting holes may not line up, the nut may not fit inside the machine housing, or the internal specifications may not match the existing screw. For equipment manufacturers, these mistakes mean extra machining, delayed assembly, and additional costs.
So, how should you compare these four types? The first step is to look beyond the model number and check the actual construction and dimensions.

Ball screw nuts for CNC and industrial automation applications
1. Understanding the Four Types of Ball Screw Nuts
SFU, SFS, SFY, and SFE are common series designations found in product catalogs. Each manufacturer may have its own design details, so the letters alone do not tell you everything about the product.
SFU: A Common Option for CNC and Automation Equipment
SFU is one of the frequently used series in industrial motion systems. It can be found in CNC machines, automated equipment, and positioning mechanisms.
Take the SFU1605 as an example. The number generally indicates a 16 mm nominal screw diameter and a 5 mm lead. In a conventional single-start configuration, the nut moves 5 mm along the screw for each full revolution.
This makes the model relatively easy to identify when discussing basic screw specifications. However, diameter and lead are only part of the selection process. Buyers also need to check the nut's overall length, outer diameter, flange dimensions, mounting holes, and ball return structure.
An SFU Ball Screw Nut may look similar to another nut with the same nominal diameter, but that does not mean the two are interchangeable.

BAILI SFU ball screw nut
SFS: Pay Attention to the External Structure
When comparing SFS models, start with the physical dimensions and mounting arrangement. The nut body, flange or mounting features, and space required for installation all need to match the machine design.
This is particularly important for compact equipment. For example, if a machine housing has already been manufactured, even a small difference in nut length or mounting-hole position can make direct installation impossible.
Before ordering, ask for a dimensional drawing and compare it with the space available in your equipment. Do not assume that an SFS model from one manufacturer has exactly the same dimensions as a similarly named model from another supplier.
SFY: Check the Actual Model Specifications
SFY is another series that requires attention to its specific construction. Buyers should not select it simply because its model designation appears close to an existing SFU or SFS product.
Check the screw diameter, lead, nut body dimensions, mounting method, and internal ball circulation design. If the nut is being used in a machine that already has an established motion system, the original component drawing is especially useful.
For maintenance teams, this step can save time. Instead of ordering several nuts for trial fitting, they can confirm the required dimensions before production or shipment.
SFE: Consider the Complete Assembly
SFE models are also available in ball screw product ranges. Their suitability depends on the actual design and specifications supplied by the manufacturer.
When reviewing an SFE model, pay attention to its overall length, mounting dimensions, compatible screw specifications, and rated loads. If the machine requires precise positioning, also check the available accuracy grade and preload configuration.
A nut should never be evaluated separately from the screw it runs on. The two components need matching raceway geometry and ball specifications to operate correctly.
2. What Should You Compare Before Choosing?
Instead of asking which series is best, it is more useful to compare the specifications that affect your machine.
| Item | Why It Matters |
|---|---|
| Screw diameter | Determines the nominal screw size |
| Lead | Affects travel distance per revolution |
| Nut dimensions | Determines whether the nut fits the machine |
| Mounting holes | Must match the installation structure |
| Ball circulation | Affects the internal rolling arrangement |
| Dynamic load rating | Used to assess fatigue life under operating loads |
| Static load rating | Helps prevent permanent deformation |
| Preload | Reduces internal clearance and backlash |
| Accuracy grade | Determines the specified positioning accuracy |
Ball Circulation and Running Performance
Inside a ball screw, steel balls roll between the screw shaft and the nut. After reaching the end of the load-bearing path, they return through a circulation system and repeat the process.
This return path is an important part of the nut design. Different arrangements require different internal space and construction. They may also have different operating characteristics.
When comparing SFU, SFS, SFY, and SFE, ask the supplier for a structural drawing if the circulation design is important to your application. A product photograph alone usually cannot show how the balls move inside the nut.
Load and Service Life
A nut used in a small positioning table does not necessarily need the same load capacity as one installed in a heavy CNC machine.
Two specifications are particularly important:
Dynamic load rating (C): Used to calculate the expected fatigue life of the rolling component under repeated movement.
Static load rating (C₀): Indicates the component's resistance to permanent deformation under stationary or slowly changing loads.
For example, a machine that moves a workpiece repeatedly throughout an eight-hour shift needs to be evaluated differently from equipment that adjusts its position only occasionally.
The calculation should consider working load, acceleration, operating frequency, and expected service life. Simply choosing the largest available nut is not always the most practical solution.
Preload and Backlash
Backlash is the small amount of movement that can occur before the transmission responds when the direction of travel changes. Preload applies an internal force to reduce this clearance.
For CNC machining and precision positioning, backlash can affect repeatability and movement accuracy. However, higher preload also increases friction and can generate more heat during operation.
The right configuration depends on the machine's requirements. Buyers should confirm the available preload options rather than assuming every model comes with the same configuration.
3. Which Type Should You Choose for Your Machine?
The application often provides a better starting point than the series name.
- CNC machines: Check positioning accuracy, rigidity, preload, and the expected duty cycle. The screw, nut, support bearings, and drive motor should be considered as one transmission system.
- Automated production lines: Repeated movement and frequent acceleration make operating speed, lubrication, and load conditions important. Also check whether the nut can be installed and maintained easily within the machine structure.
- Heavy-load equipment: Calculate the actual axial load, including acceleration and possible impact forces. Compare both dynamic and static load ratings before confirming the model.
- Precision positioning equipment: Focus on accuracy grade, backlash, preload, and thermal effects. Temperature changes can cause the screw to expand, which may influence positioning over longer travel distances.
For example, a manufacturer building a new CNC machine may have more freedom to adjust the mounting structure around the selected nut. A maintenance engineer replacing an existing component has a different task: finding a nut that matches the original screw and installation dimensions. These two buyers should not follow exactly the same selection process.
4. Can You Replace One Series with Another?
Not simply because the diameter and lead are the same.
A replacement nut must match the screw's working specifications and the machine's mounting requirements. Differences in ball size, raceway geometry, internal clearance, and circulation design can prevent a replacement from working properly.
Before ordering, prepare:
- The original nut model and manufacturer.
- Screw diameter and lead.
- Nut length and outside diameter.
- Flange dimensions and mounting-hole positions.
- Preload and accuracy requirements.
- A photograph or dimensional drawing of the original component.
If the model marking has worn off, a physical sample can be useful. The supplier can measure the component and compare its dimensions with available designs.
This is particularly helpful when maintaining older equipment for which the original product catalog is no longer available.
5. What to Look for in a Ball Screw Manufacturer
Product specifications are important, but the manufacturer's machining and inspection capabilities also deserve attention. Small dimensional errors can affect assembly and running performance, especially in precision motion systems.
Zhejiang Baili Guide Rail Manufacturing Co., Ltd. has more than 20 years of team experience in the linear motion industry. Its product range covers linear guide rails, sliders, screws, and related nuts.
The company operates a 14,000 m² factory in Lishui, Zhejiang, China. Its production facilities include CNC grinding machines introduced from Japan and Germany. A coordinate measuring machine (CMM) is used to inspect dimensions and geometric tolerances. Unlike a simple manual measurement, CMM inspection can measure multiple points and features against an engineering drawing.
For buyers who need a replacement component or a non-standard specification, this equipment is relevant because dimensional confirmation is often the first step before production.
Baili reports a monthly production capacity of up to 100,000 sets and offers standard products with a stated delivery time of 7–15 days, subject to model availability and order details. The minimum order quantity is one piece, which is useful for customers who want to test a sample before committing to a larger order.
The company also accepts customization requests. Buyers can send technical drawings or samples to discuss dimensions and manufacturing requirements before confirming an order.

Conclusion
SFU, SFS, SFY, and SFE should not be selected by model name alone. Their actual dimensions, internal construction, mounting arrangements, and performance specifications are what determine whether they suit a particular machine.
For a new design, start with the required load, travel speed, accuracy, and installation space. For a replacement, begin with the original nut and screw dimensions. In both cases, request a technical drawing and confirm compatibility before ordering.
If you are unsure which model fits your equipment, contact Zhejiang Baili Guide Rail Manufacturing Co., Ltd. with your specifications, drawings, or sample. Confirming the details before production is much easier than correcting a mismatch after delivery.
Frequently Asked Questions
1. What is the difference between SFU, SFS, SFY, and SFE?
They are different product series used by ball screw manufacturers. Their exact structural differences depend on the manufacturer's design. Compare the product drawings and specifications rather than relying only on the series name.
2. Can I replace an SFU nut with an SFS or SFY nut?
Not necessarily. The screw diameter, lead, ball specifications, raceway geometry, and mounting dimensions must be compatible. Confirm the replacement with the manufacturer first.
3. How do I identify an existing ball screw nut?
Check its model marking, screw diameter, lead, overall dimensions, and mounting structure. If the marking is missing, send the supplier clear photographs and a dimensional drawing.
4. Does higher preload always mean better accuracy?
No. Preload can reduce backlash and improve rigidity, but excessive preload may increase friction, heat, and motor torque requirements. Choose it according to the machine's operating conditions.
5. Can Baili supply samples and customized products?
Yes. Baili's stated minimum order quantity is one piece. Samples and non-standard customization are available for discussion. Buyers can provide drawings or physical samples to help confirm the required specifications.
